Compact Digital Design Class D Amplifier 1000 Watt 2 Ways Amp for
About D81000 Digital Audio Amplifier:
|● 8 ohm Stereo: 2 x 1000 Watts||● 4 ohm Stereo: 2 x 1600 Watts|
|● 8 ohm Bridge: 3200 Watts||● Slew Rate: >20V/μs|
|● Dynamic Range: ≥95dB||● THD: < 0.1%|
|● Frequency Response: 10Hz-30Khz+0/-3dB||● Signal-to-Noise Ratio: 112dB|
|● Input Impedance: 20k ohm balance /10kohm imbalance||● Power: 200-240V / 50-60Hz|
|● Min/Max power: 180-260V / 50-60Hz||● Class: D|
|● Dimensions (H x V x D): 230MM * 480MM * 45MM||● Net weight: 3.8 kgs|
|● Tour Class Protection: Auto Ramp, short circuit, DC
voltage,turn-on/off transient,current inrush|
|● Level adjustment(per ch.): Front-panel potentiometer,31position
detented from-inf to 0dB|
Details Information for the Components:
|1. Pure copper, high-power output inductor||Function: ensure output having a large dynamic range|
|2. High-class French Thomson feedback capacitor||Function: it is important for the subtleness and width of mid-high
|3. Original On Semi compound zener-transistor||Function: stabilized voltage power-supply of preceding stage|
4. ELNA DUOREX RJH hifi capacitor (purple body with gold letter,
transparent sound, moderate speed,
low distortion, high resolution)
|Function: stabilized voltage power-supply filtering of preceding
|5. Original America ADI OP275G op-amp|
Function: preceding stage amplification
|6. Panasonic Output Relay||Function: boot with mute protection, DC protection|
|7. Philips safety capacitor|
Function: to prevent the self-excitation caused by long distance
audio cable transmission
|8. Taiwan X2 safety capacitor||Function: to prevent interference from electricity clutters|
|9. High-power soft boot NTC||Function: to Prevent the boot impact upon power grid|
|10. The whole machine all adopts pure copper cables with PTFE
(Polytetrafluoroethylene) Insulationofacable||Function: heat-resistance, strong current-resistance, long-time
● 1U flight case, the deep just 15CM, weight less than 3.8KG,
output power 2*1600W @4 ohm.
● Built-in powered band pass signal filter, effectively filter out
useless audio signal.
● 2-channel 2×300W / 600W / 800W / 1000W power output.
● it has separate status indicators include signal, peak,
protection and Led power supply.
● 70 CFM fans as cooling system, in very low noise.
● Defensive function (DC protection, over temperature protection,
VHF protection, peak pressure limit, soft start)
● Adopt high power digital amplifier module, inside has SMD
TDS Products Introduction:
TDS Pro Audio Factory is specialized in line array speakers, 6.5"
mini-line array, dual 8" compact line array, single
and dual 10 inch line array, dual 12" and dual 15" line array
For full range speakers, our best-selling items are SRX series, PS
series and MK series.
No matter small event, medium performance, or large scale touring,
TDS could offer any line array system as
Except the line array loudspeaker and full range speakers, our
power amplifiers, processors, mixers,
microphones, and all the other accessories for integrated sound
system, are also very competitive.
Until now, our line arrays are adopted in various projects all over
the world, and every customer is satisfied with
TDS Showroom + TDS in Pro-audio Exhibitions + TDS Production Line
TDS Line Array + Power Amplifiers Project Case
For more details pls contact us by email: email@example.com